10
Oneida Air Systems, Inc.
FIG. 5a
FIG. 5b
FIG. 6
5
Attach the two remaining Leg Assemblies
to each end of the previously installed Short
Braces as shown in [FIG. 5a]. Ensure that
all Leg Assemblies are attached in matching
positions.
Secure each Leg Assembly to two Short Braces
using four Bolts (D2), four Washers (D3), and
four Whiz-Nuts (D4) [FIG. 5b].
Note: Finger tighten only at this time.
6
Attach the two remaining Long Braces (C) to
the Stand Assembly, making sure that they
align underneath the fins of the installed Short
Braces (E) . Secure them in place using six
Bolts (D2), six Washers (D3), and six Whiz-
Nuts (D4) for each Long Brace [FIG. 6].
Note: Finger tighten only at this time.
Assembly Instructions (Continued)
