Oneida Air Systems Super Dust Gorilla 2hp, Owner'S Manual

XIV. Options

Exhaust Diverter

Square-to-Round

Flex Hose

Fiber or Steel Dust Bins

Remote Control Switch - 

Does not work for 3 phase - 220v only

Stand - 2hp

Can be used either pointing up or down. Useable only on No

Filter or Internal Filter Models.

Part # - BQX207100

For all models. Converts the flanged rectangular outlet to a

8” dia. round. Required when adding a silencer.

Part # - BQX208001

3hp - 10” dia. clear flex hose. Longer lengths

can be purchased to accomodate different

mounting heights.

Part # - DHF100000

Fiber 35 gal. - 22” dia. x 22.5” high Part # - SDS350000

Fiber 55 gal. - 22” dia. x 35.5” high Part # - SDS550000

Steel 55 gal. - weather resistant -

                     -  23” dia. x 34” high Part # - SES550000

The system is easy to install. The relay plugs into the 220v outlet

between the outlet and the collector. (This activates the dust collector.)

The Transceiver receives the signal from your hand-held Transmitter

and sends the signal to the relay and is plugged into any 110v outlet

in your shop that is on the same service as the collector. Extra

Transmitter available.

Note: The customer will need to run a 220 cord and plug to the system.

It does not come pre-wired.

Part # - AWX220000     Extra Transmitter - Part # - AWT220000

34”

Fiber

Fiber

Our stock drums range from 34” to 35 3/4”.

2hp Iron Stand

35 gal. - 89 7/8”h x 27 1/4”w x 28 3/8” deep

55 gal. - same as 35 gal.

       Part # - STZ020035 (2.0 w/ 35 gal.)

       Part # - STZ020055 (2.0 w/ 55 gal.)

2HP Commercial Wood Dust Collector Owner’s Manual

O.A.S. 2002

c

Hose Clamp

Hose Clamp

7” Flex Hose

Drum

Pants Wye

Splitter Kit

Part # - SDK351007 - Kit

as shown w/ (2) 35 gal.

fiber drums

Part # - SDK551007 -

same w/ 55 gal. fiber

drums

Part # - SEK551007 -

same w/ 55 gal steel

drums

HEAVY DUTY

APPLIANCE

MODULE

A

1

Transceiver Module

House

A

15