background image

30 Oneida Air Systems

Limited Warranty – Activate online at oneida-air.com/warranty

Oneida Air Systems®, Inc. (OAS) warrants the Supercell for a period of 1 year,  to the original purchaser from the date of purchase, unless otherwise 

specified.

 Items not manufactured by Oneida Air Systems are limited to their own manufacturer’s warranties. All electrical items such as magnetic 

starters, remotes, sensors, pumps, bin sensors, bag grippers, etc. and accessories are limited to 90 days. Oneida Air Systems warrants that the product 

will be free from defects in materials and workmanship.
This is Oneida Air Systems’ sole written warranty and any and all warranties that may be implied by law, including any merchantability or fitness, for any 

particular purpose, are hereby limited to the duration of this written warranty. Oneida Air Systems does not warrant or represent that the merchandise 

complies with the provisions of any law or acts unless the manufacturer so warrants. This warranty does not apply to defects due directly or indirectly to 

misuse, negligence, accidents, abuse, repairs, alterations, improper wiring or lack of maintenance. In no event shall Oneida Air Systems’ liability under 

this warranty exceed the purchase price paid for the product and any legal actions brought against Oneida Air Systems shall be tried in the State of New 

York, County of Onondaga.
The buyer is cautioned to install and operate Dust Collectors in accordance with prescribed Federal, State, OSHA, NFPA, local codes and regulations. 

This equipment should be installed/wired by a licensed electrician following all applicable codes. Local codes can be significantly different from national 

codes. The customer assumes the responsibility for contacting their insurance underwriter with regard to specific application requirements of venting 

or if additional fire protection and safety equipment may be required. Oneida Air Systems shall in no event be liable for death, injuries to persons or 

property or for incidental, and contingent, special, or consequential damages arising from the use of our product.
Oneida Air Systems makes every effort to accurately represent our products and prices, however Oneida Air Systems reserves the right to make changes 

to products and prices at any time. As a manufacturer, Oneida Air Systems reserves the right to change product specifications at any time in an effort to 

achieve better quality products.

SAFETY WARNING - PLEASE READ

Before Purchasing or Installing a dust collection system the buyer is cautioned to do so in accordance with prescribed Federal, State, Local, OSHA, 

NFPA, and any other applicable codes or regulations relating to the type of dust(s) you are collecting.

SOME TYPES OF DUST UNDER CERTAIN CONDITIONS HAVE THE POTENTIAL TO BE EXPLOSIVE. 

Oneida Air Systems is not responsible for how the dust collector is used or installed. Dusts with deflagration or explosion risks, such as wood dust, 

may require additional safety equipment including but not limited to; venting, spark detection, suppression systems, back draft dampers or may require 

installation in an outside location or in a protected area away from personnel. The customer assumes the responsibility for contacting their insurance 

underwriter with regard to specific engineering controls or application requirements. (We suggest you reference NFPA 664, 654 and 68 codes for more 

information) Oneida Air Dust Collection Systems may not be suitable for some applications and are not designed to be used in explosive atmospheres. 

Oneida Air Systems equipment should only be installed and wired by a licensed electrician following all applicable local and national electrical codes. 
Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth 

defects or other reproductive harm. Some examples of these chemicals are: Lead from lead-based paints; Crystalline silica from bricks, cement and other 

masonry products; Arsenic and chromium from chemically-treated lumber; etc.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals, work in a well 

ventilated area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles. Oneida 

Air Systems recommends using additional approved safety equipment such as an approved OSHA and NIOSH dust mask or respirator.
Oneida Air Systems makes every effort to accurately represent our products, specifications and prices; however Oneida Air Systems reserves the right to 

make changes to products and prices at any time. As a manufacturer, Oneida Air Systems reserves the right to change product designs and specifications 

at any time.

Warranty Information

 

ONEIDA AIR SYSTEMS SHALL IN NO EVENT BE LIABLE FOR DEATH, INJURIES TO PERSONS OR PROPERTY OR 

FOR INCIDENTAL, AND CONTINGENT, SPECIAL, OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OF 

OUR PRODUCT. 

Summary of Contents for Supercell XSK000030



































Reviews: