5
Examples of Bang & Olufsen Set Ups
Set Up for Direct Control
The Bang & Olufsen remote terminal controls both the
OneRemote DAB/FM tuner and the Bang & Olufsen audio
equipment..
When selecting the tuner connected source with the Bang
& Olufsen remote the corresponding input socket is
opened, and the tuner is turned on simultaneously.
The tuner can be listened to in any connected linkroom,
but not controlled fromthere.
Set Up for CableLink Control
The Bang & Olufsen remote terminal controls the OneRemote
DAB/FM tuner via the Bang & Olufsen audio equipment that is
transmitting control data via the 7-pin DIN connection cable.
When selecting the tuner connected source with the Bang &
Olufsen remote terminal the corresponding input socket is
opened, control data transmitted via the connection cable and
the tuner is turned on.
Control data is only available via some input sockets in
various Bang & Olufsen audio equipment.
A OneRemote DAB/FM tuner connected via CableLink can be
controlled from any connected linkroom.
Set Up for CableLink Control
The OneRemote tuner is connected as an AV source to an
AV input in a Bang & Olufsen TV.
When selecting the tuner connected source with the Bang
& Olufsen remote terminal the corresponding AV input
socket is opened, control data transmitted via the
connection cable and the tuner is turned on.
A OneRemote DAB/FM tuner connected via CableLink
can be controlled from any connected linkroom.
Set Up for Direct Control
A OneRemote DAB/FM tuner may be connected to any TV, and
with a tuner in each room individual program selection is
possible.
