www.oneremote.dk
9
OPTIONS
Option programming of the DabWiFi5 tuner is only required during the initial installation. A Bang
& Olufsen remote is used for this programming activity.
Programming the DabWiFI5 with one or more options makes the DabWiFi5 fit the actual Bang &
Olufsen system that it is now a part of.
Options might also be used to activate or de-activate various special functions. Thus, more options
might be required to be entered, and when so they are added one by one.
When DabWiFi5 is
connected to power
, a blue light on the front is flashing for 8 seconds.
Only while the light flashes blue, is it possible to program an option. If missed or if there is a need
to entering further options, power must be removed for 20 seconds.
While programming an option, only the keys
and
1
to
9
are being used.
Programming is finalized by pressing the standby key
w
. This, or any other key, will make
DabWiFi5 abandon the programming mode, ending the lamp flashing blue.
Programming is started by pressing
and ended by pressing
w
. All options have 3 digits
entered between these two.
When power is applied and the blue lamp flashes:
1.
Within 8 secs: Press
L
on the Bang & Olufsen remote.
2.
Within 8 secs: Press the
first
option digit on the Bang & Olufsen remote.
3.
Within 8 secs: Press the
second
option digit on the Bang & Olufsen remote.
4.
Within 8 secs: Press the
third
option digit on the Bang & Olufsen remote.
5.
Within 8 secs: Press
w
o
n the Bang & Olufsen remote.
(The power off key with a red dot).
6.
Instantaneously the blue control light is switched off.
Option 106 programming:
L
*1
106w
*1 if the key
L
is not available, press SHIFT-LINK (older remotes only)
Valid options are found in the tables below.
Summary of Contents for DabWiFi5
Page 2: ...www oneremote dk 2...
