7
www.oneremote.dk
iRadio2 Connection to Bang & Olufsen Equipment
This OneRemote iRadio2 tuner connects to ALL Bang & Olufsen equipment having a vacant audio input, like
BeoSound, BeoCenter, BeoMaster, BeoSystem or BeoVision TV, and it is controlled by a Bang & Olufsen remote
control terminal. iRadio2 may be connected to any equipment of other brands too, but it requires control by a Bang &
Olufsen remote.
Over the years Bang & Olufsen has added, removed or renamed inputs for peripherals and in the most recent remote
controls N.Music has replaced the earlier SHIFT- A.TAPE or A.TAPE2.
Below tables list various Bang & Olufsen equipment with specified inputs, names and the corresponding source
selection to be used when opening an input. This enables selection of any named Bang & Olufsen product, its input,
the corresponding iRadio2 option and the remote command that allows for control of the tuner.
Some inputs allow for selection of a CableLink option, but most of the more recent Bang & Olufsen products require a
Direct Mode option, i.e. direct control of the iRadio2. Alternatively see the application of BeoLink Converter p. 15.
Direct Control, “Direct Mode”
The IRadio2 is controlled directly by a Bang & Olufsen remote control terminal. Thus control from a link room is NOT
possible, but the iRadio2 may be listened to anywhere, when it has been selected as a source.
Direct Mode
Direct Mode may be used in any Bang & Olufsen system.
The iRadio2 tuner’s IR receiver is not plasma safe.
Indirect control, ”CableLink Mode”
The iRadio2 is controlled with a Bang & Olufsen remote via the connected Bang & Olufsen equipment that relays
control commands via the connection cable. The iRadio2 may be controlled from any connected link room.
CableLink
The CableLink option allows for control from any link room.
