ASSEMBLY INSTRUCTIONS
6
STEP 1
Back Leg Piece which will be used to attach the Lower Bar (9). Attach the Back and Front Legs using the M6 x 35mm screw
with the nut (G). Repeat with the other three sets of leg pieces. Make sure not to connect one front piece with another, or a
back piece with a back. Attach the four Lower Leg Frames (4) to the leg pieces using sixteen M6 x 12mm screws (D). Place the
Upper Leg Frames (3) on top of the legs.
STEP 2
Using four M4 x 14mm (round head) screws (H) attach the Left Slide (17) to the Left Tray Support (11) and the Right Slide (17)
to the Right Tray Support (12). Make sure the tabs on the slides are at the bottom.
G x 4
D x 16
H x 4
K
Extra screw hole in the
back leg piece
1
4
3
12
17
17
11
2
Tab should be
on the bottom
