3
Take a test
33
NOTE:
•
Use only OneTouch Select® Plus Test Strips.
•
Unlike some blood glucose meters, no separate step to
code your OneTouch Select® Plus System is required.
•
Make sure your meter and test strips are about the
same temperature before you test.
•
Do Not
test if there is condensation (water build-up)
on your meter. Move your meter and test strips to a
cool, dry spot and wait for the meter surface to dry
before testing.
•
Keep test strips in a cool, dry place between 5°C and
30°C.
•
Do Not
open the test strip vial until you are ready to
remove a test strip and perform a test. Use the test
strip
immediately
after removing it from the vial,
especially in high humidity environments.
Summary of Contents for Select PLUS
