If any white patches or white streaks appear on the confirmation
dot, you have not applied enough blood for an accurate test.
Repeat the test with a new test strip to avoid getting a false
low result or an error message. Apply a larger drop of blood
to the pink test square and verify that the confirmation dot
has turned completely blue.
What to Do If the
Message Appears
on the Display and the Confirmation Dot
Is Not Completely Blue
IMPORTANT: For a complete description of operating instructions and other
important technical information, please refer to the SURESTEP
®
Blood
Glucose Monitoring System Owner’s Booklet.
© LIFESCAN INC.
Printed in U.S.A. 1997
White
Pad
Confirmation
Dot
Pink
Test
Square
Enough Blood
Back
Back
Front
Not Enough
Blood
Back
Front
3-STEP TEST PROCEDURE
AW 050-022-01B
2
Check confirmation dot on back of
test strip.
3
Push test strip pink side up firmly
into holder until it stops. Read result
(30-second average test time).
1
Press blue power button and apply
blood to pink test square.
LSI-97-175_TSinsert_new3 5/8/98 10:00 AM Page 2
