background image

10

Onga  Product  Warranty

Onga warrants that, when this product is used for the purpose it was designed, is correctly housed and vented
against weather, vermin, dust etc., that it will be free of material and manufacturing defects at the time of the
original purchase.

This warranty is limited to the cost of the product and does not cover third party costs including the costs
of electricians, plumbers, etc. unless authorised by Onga pumps.

TERMS AND CONDITIONS APPLICABLE INTERNATIONALLY

How long the warranty is effective Internationally

1)

This Onga product is warranted for 12 months for all parts from the date of the first consumer

purchase. Should any parts fail as a result of such defects within the specified period, the part will

be replaced free of charge. (This does not include travel charges, removal and reinstallation

charges.)

TERMS AND CONDITIONS APPLICABLE IN AUSTRALIA AND
NEW ZEALAND

1)

YOU SHOULD CAREFULLY READ THE INSTRUCTIONS SUPPLIED PRIOR TO USING THIS ONGA

PRODUCT.

This product is to be installed and operated in accordance with the instructions provided.

This warranty will not apply if it is used in a manner otherwise than in accordance with

the instructions.

What the warranty covers:

Onga

 warrants its products to be free of defects in material and workmanship during the

warranty period.  If a product proves to be defective in material or workmanship during

the warranty period, then 

Onga 

will, at its sole option 

repair or replace the product with a like

product.

 

Replacement product or parts may include re-manufactured or refurbished parts or

components.

How long the warranty is effective:

1) This Onga product is warranted for 12 months

 

for all parts from the date of the first

consumer purchase.

2) Where this Onga product is sold for commercial application as defined in the relevant

Trade Practices and Consumer Protection legislation the warranty shall be for a period of

six months from the date of purchase by the end user.

3) Ancillary equipment including but not limited to plastics and metal fittings, electrical

controls (including touch pads), bladders, pressure switches, filter cartridges, pressure

gauges, etc. shall be warranted for a period of twelve months only in relation to consumer

applications and six months in relation to commercial applications.

Who the warranty protects:

This warranty is valid only for the consumer purchaser.

What the warranty does not cover:

1) Damage, deterioration or malfunction resulting from:

a)

accident, misuse, negligence, fire, water, lightning, or other acts of nature, unauthorised

product modification or failure to follow instructions supplied with the product;

b)

repair or attempted repair by anyone not authorised by Onga;

c)

any damage to the product due to shipment;

d)

removal or installation of the product;

e)

causes external to the product such as electric power fluctuations or failure;

f)

use of supplies or parts not meeting Onga specifications;

g)

normal wear and tear;

h)

water ingression or exposure to abnormal corrosive conditions or run in dry conditions;

i)

any other cause which does not relate to a product defect.

2)

Damage caused to the product as a consequence of use of another manufacturer’s product

used in conjunction with Onga and affiliate companies.

3)

This warranty does not cover such products as combustion engines, mechanical seals or other

component parts of units not manufactured by Onga, but where possible Onga will make

available to purchaser the benefit of any warranty of that manufacturer.

4)

This guarantee does not cover underwater light bulbs, underwater lights will only be warranted

if wiring is to approved standards, and an approved transformer incorporating thermistors has

been used, running the light not submerged in water will void warranty.

Summary of Contents for B Series













Reviews: