3
Table of Contents
1
Warnings
Page 3
2
Models and technical information
Page 4
3
Application
Page 5
4
Installation
•
•
•
•
•
Preparation for operation
•
•
•
•
•
Pump Protection
•
•
•
•
•
Suction
•
•
•
•
•
Discharge
5
Operation
Page 6
6
Service & Maintenance
Page 7
7
Exploded diagram- Internal parts
Page 8
8
Warranty
Page 10
9
Purchase Details
Page 11
1.
Warnings:
These instructions are a guide only. Users not familiar with pumping
equipment should seek advice from people with experience in pump
equipment and installation
The pump operator must be provided with this owner’s manual and
the engine manufacturer’s owner’s manual. These must be read be-
fore operation and followed during operation.
No oil is supplied with the engine. Oil must be added in accordance
with the engine manufacturer’s instructions
Do not run the pump without liquid in the casing. Always fill the pump
casing with liquid and prime the pump before use (see page 5). Do not
allow the pump to continue running once the water supply is empty or
has been shut off.
Do not operate the pump in an explosive environment or near
combustible matter.
Ensure the pump is on a stable footing before operating. Please refer
to the engine manufacturer’s owner’s manual.
After use, the engine will be very hot. Do not touch the engine. During
use the engine will become very hot. Make sure that you do not touch
the engine before it has completely cooled down.
Do not use the pump in an enclosed area – engine exhaust will build
up and cause asphyxiation
Summary of Contents for B Series
Page 12: ...12 L1 00031 803 ...
