![background image](http://html.mh-extra.com/html/onicon/fox-thermal-ft4x/fox-thermal-ft4x_quick-start-manual_1636080111.webp)
Agency Approvals
CE: Approved
EMC Directive; 2014/30/EU
Electrical Equipment for Measurement, Control and Lab Use: EN61326-1:2013
Pressure Equipment Directive: 2014/68/EU Article 13
Weld Testing: EN ISO 15614-1 and EN ISO 9606-1, ASME B31.3
FM (FM17US0061X) and FMc (FM17CA0032X): Approved
Class I, Division 1, Groups B,C,D;
Class II, Division 1, Groups E,F,G;
Class III, Division 1; T6 or T4, Ta = - 40˚C to +70˚C;
Class 1, Zone 1, AEx/Ex db IIB + H2 T6 or T4 Gb; Ta= -20˚C to +70˚C; Type 4X, IP67
ATEX (FM17ATEX0015X): Approved
II 2 G Ex db IIB + H2 T6 or T4 Gb Ta = - 20˚C to +70˚C; IP67
II 2 D Ex tb IIIC T85˚C or T135˚C Db Ta = - 20˚C to +70˚C; IP67
IECEx (IECEx FMG 17.0008X): Approved
Ex db IIB + H2 T6 or T4 Gb Ta = - 20˚C to +70˚C; IP67
Ex tb IIIC T85˚C or T135˚C Db Ta = - 20˚C to +70˚C; IP67
ATEX and IECEx Standards:
EN 60079-0: 2012 + A11:2013
IEC 60079-0: 2011
EN 60079-1: 2014
IEC 60079-1: 2014
EN 60079-31: 2014
IEC 60079-31: 2013
EN 60529: 1991 +A1: 2000
IEC 60529: 2001
Model
Code
Temperature Code
Marking - Divisions (All)
Temperature Code
Marking - Zones (Gas)
Temperature Code
Marking - Zones (Dust)
Enclosure
(variable 'b')
Main
Enclosure
Remote
Enclosure
Main
Enclosure
Remote
Enclosure
Main
Enclosure
Remote
Enclosure
E1
T4
N/A
T4
N/A
T135°C
N/A
E3
T6
T4
T6
T4
T85°C
T135°C
Temperature code ratings for Zones are dependent on external process temperature factors
and equipment enclosure configuration. See the table above for specific temperature code
ratings.
NOTE!
The EU Pressure Equipment Directive (PED) requires that the minimum ambient
and fluid temperature rating for carbon steel flow bodies not be below -29°C.
i
111
Model FT4X
APPENDICES
Appendices