![background image](http://html.mh-extra.com/html/onicon/fox-thermal-ft4x/fox-thermal-ft4x_quick-start-manual_1636080044.webp)
Programming: Data Entry using the Display and Configuration Panel
There are 2 basic types of menu entries: one for changing value or string and one for selecting
from a selection list.
To Change a Value or String :
F1 F2 F3 F4
Press
CHG (F1)
key to change the value,
OK (F4)
to accept the value.
F1 F2 F3 F4
Press the
UP (F1) or DN (F2)
key to select a new digit or character, the cursor points to the
selected digit. Press
NXT (F3)
to select the next digit and
OK (F4)
to accept the entry.
To Select from a List:
F1 F2 F3 F4
Press
NXT (F1)
key repeatedly until the correct selection is made and
OK (F4)
key to accept
the entry.
Entering the Programming Mode
To enter the programming mode and access the Main Menu, press the
F1
or
F2
key in the
normal running mode until the following screen is shown:
F1 F2 F3 F4
Press
YES (F4)
and the following screen will prompt user to enter password:
F1 F2 F3 F4
VALUE = 0.91234
CHG
OK
VALUE = 0.91234
UP DN NXT OK
FLO UNT = SCFM
NXT OK
SET PARAMETERS ?
No Yes
PASWD:_
UP DN NXT OK
44
Model FT4X
OPERA
TION
Operation
Model FT4X
OPERA
TION