Precision Flow Measurement
An ON
I
CON Brand
EX90 Propeller Replacement
Quick Start Guide
253.872.0284
Page 1 of 4
seametrics.com
Recommended Tools
Recommended Tools
Recommended:
•
3/32” or 2.5mm (small) flat head screw driver
•
Crescent Wrench
• 5/32” Hex Key
Optional:
•
Channel locks
•
6” Strap Wrench
Warnings
Warnings
•
Confirm that U-clip retainer is installed and never remove the
U-clip retainer when pipe is under pressure—may result in
serious injury.
•
Saddle bolts must be tightened evenly. Do not over tighten.
•
Install security seal during installation if regulations require.
•
Improper sealing of cables or cable glands will void warranty.
•
Ensure proper grounding when required.
•
Programming pipe ID, pipe insertion hole size and straight pipe
configuration is required for the meter to read.
Refer to instruction manual for further details.
Check Components
Check Components
Optional
Optional
Display Security Seal
Cable Gland
U-clip Retainer
Meter with Indicator
and hinged cover
Saddle Assembly
(Packaged Separately)
Saddle Gasket
Power/Output Cable
