SYSTEM-10 BTU METER
ONICON Incorporated 727.447.6140
Page 11 onicon.com
2.1.3 The System-10 BTU Meter
2.1.4 Temperature Sensors
2.1.5 Temperature Thermowells Installation Hardware
2.1.6 Flow Meter
Remove the System-10 from the shipping carton and inspect it for physical damage. Notify the freight carrier and
ONICON immediately if any items are damaged in transit. Save all packaging.
BTU meters ordered with a flow meter and temperature sensors will be delivered configured and programmed for use
together as a system. The System-10 and the temperature sensor serial numbers will match. The flow meter serial number
will be shown on the certificate of calibration and on the System-10 display.
If ordered, temperature sensors will generally be packed in the same carton with the System-10. Inspect the sensors and
cables for damage. Each sensor will have a label attached with a serial number.
Temperature thermowells installation hardware are frequently shipped in advance of the meter(s). Otherwise, the Dry Tap
thermowells installation hardware are packed with the System-10 meter. Optional Hot Tap thermowells will be shipped in
a separate box.
The flow meter will be packaged in a separate carton. The flow meter ordered with this BTU meter came complete with an
instruction manual. Please refer to it for detailed information regarding its installation, commissioning, and operation.
Each BTU meter is calibrated to a specific flow meter and must be used together as a system. If the flow meter and
BTU meter were purchased together, the serial number on the flow meter should match the serial number on the label
mounted directly on the BTU meter.