![background image](http://html.mh-extra.com/html/onicon/sys-10-1110-01o1/sys-10-1110-01o1_installation-and-operation-manual_1636085029.webp)
SYSTEM-10 BTU METER
ONICON Incorporated 727.447.6140
Page 29 onicon.com
J1
5
G
60HZ
1
J2-1
+15
+24
J2-12
G
G
10
R7
H3
R1
20075-50 REV. A
LED1
T1
D1
D2
VAR1
120VAC
F1
NEUTRAL
1/4 AMP
TB1
D4
D3
H1
1
CAUTION
Analog outputs are all configured as active outputs. Do not apply power to any of the 4-20 mA, 0-10 or 0-5 volt
outputs. Doing so will damage the output.
The System-10 can be configured to provide up to four (4) isolated analog outputs of the following five parameters:
supply temperature, return temperature, flow rate, energy rate and delta temperature.
The output type, 4-20 mA, 0-10 VDC or 5 VDC is field configurable. The selected outputs and associated scaling are
configured at the factory. See the certificate of calibration or label located on the inside cover for analog output
configuration information.
Please note: If System-10 is ordered with a flow meter capable of producing an analog output, the output signal will be
available at terminal T5.
3.3.5 Optional Isolated Analog Output(s)