APPENDIX
ONICON Incorporated 727.447.6140
A - 3
onicon.com
Step 3:
Place the transmitter over the retainer nut, gently guiding the
excess wire through the center hole of the transmitter. Use
caution to avoid pinching the wires.
Step 4:
Connect field wires from the System-10 BTU meter to the
transmitter as shown. Carefully coil extra wire around the
transmitter and thread the lid onto the connection head.
IMPORTANT NOTE
In 1” pipe, thermowell must be installed in a customer
provided tee as shown below.
The thermowell, extension nipple, coupling and fitting were made
to a specific length.
DO NOT attempt to change the length of this assembly.