16
1300 886 649
Model: AUHR-014 Product Code: 49203 03/2015
www.tempo.org
AUS
Instructions (Cont.)
• Set the radio channel to the channel specified by your local
repeater station.
• Press the LOCK button for 1 second to activate/deactivate the
repeater function.
• The radio will automatically send the signal at 30 channels
above the original channel in order to access the repeater
station. After transmitting, the radio reverts back to its original
operating channel.
Sending a Call Tone
• With the unit in normal mode, press the C (Call tone) button
briefly. The microphone will be muted and the unit will transmit
the current call tone to other users with the same channel and
CTCSS code. The TX icon will be displayed on the LCD.
• A call tone can only be transmitted once (not more than three
seconds) in any 60 second period, no matter how often you
press the C (Call tone) button.
Keypad Lock
To avoid entering an unwanted command, press and hold the
LOCK button for about 2 seconds, the Lock icon will appear on the
LCD. When the keypad is locked, the PTT, CALL and MON buttons
are enabled. To unlock the keypad, press and hold the LOCK
button for about 2 seconds.
LCD Backlight
Shortly press the MON button to backlight the LCD. Press this
button again to turn OFF the LCD backlight.
Automatic Power Save
The radio has an automatic power save circuit designed to
extend the battery life. If it senses no signal within 10 seconds, it
automatically switches to the power save mode and the Power
Save icon will appear on the LCD. The radio can still receive
transmission in this mode.
