1. Connect power cable and signal output cable and press
“
POWER
”
switch button on the front
panel.
“
Load
”
shall be displayed on the screen. If there is disc in the machine, screen shall display
total tracks and time after a few seconds. If there is no disc, screen shall display
“
No Disc
”
. Press
“
POWER
”
switch button again to turn of the machine.
2. If the machine is not used for a long time, please unplug AC power cable of the machine.
Power on/off
Operation Procedures
5
Play the disc
1. Press
〈
〉
button on the front panel. Disc loader shall open automatically.
2. Load the disc on tray with the labeled or printed side on top. Press
〈
〉
button on the front panel.
Disc loader shall close automatically.
3. Once the loader is started, screen shall display total tracks and time.
4. Press
〈
〉
button on machine or key on remote control to play all contents on the disc.
Previous / Next
1. During normal playback, press
〈
〉
button on front panel or
〈
〉
key on remote control to play
the previous track.
2. During normal playback, press
〈
〉
button on front panel or
〈
〉
key on remote control to play
the next track.
Repeated play
1. To continuously play tracks of the current disc, press
key on remote control once. Screen shall
display
“
T
”
in front of the total track. To continuously repeat play tracks of the entire disc, press
〈
〉
key on remote control again. Screen shall display
“
A
”
in front of the total track. To cancel
repeated play function, press
〈
〉
key on remote control again. Screen shall display normally.
〈 〉
2. This key is not functional if pressed when the disc is stopped.
A-B segment repeated play
1. Press
A - B
key on remote control at the start point of your desired content. Screen shall display
“
A -
”
in front of the track. Press
〈
A - B
〉
key again at the stop point of your desired content.
Screen shall display
“
A - B
”
in front of the track and the machine shall repeatedly play the segment
between start point
“
A
”
and stop point
“
B
”
until
〈
A - B
〉
key is pressed again to cancel
segment play.
〈
〉
2. This key is not functional if pressed when the disc is stopped.
