Using Your CD Player
Using Your CD Player
Connecting To Other Equipment
Connecting To Other Equipment
Interconnect Cables
Interconnect Cables
Audio Out
Audio Out
Coaxial Digital Out
Coaxial Digital Out
Open/Close
Open/Close
Stop
Stop
Play/Pause
Play/Pause
A basic interconnect cable is supplied with the XCD-99. This cable will provide
good performance. You may choose to upgrade this cable to one of higher quality.
This may or may not improve the sound quality of the XCD-99.
These outputs are located on the back of your XCD-99 and are labeled Fixed
Analog Out. Connect these to outputs to your amplifier's CD or any other line-level
input using the supplied or a suitable interconnect cable. Match the Red inter
connect lead to the R-input and the Black interconnect lead to the L-input. Do the
same on your amplifier to ensure proper stereo reproduction.
Use this output if you are using a separate digital to analog converter(DAC) or
digital recorder. Connect to the DAC or recorder's digital input using a suitable
75 ohm screened cable. Never connect the digital output socket to a conventional
audio input.
Connecting To The Mains
Connecting To The Mains
Plugging In
Plugging In
Check that the Power button on the front of the unit is in the Off position. Push the
plug(IEC line socket) of the power cable supplied with the XCD-99 into the socket
(AC IN) on the back of the unit. Make sure it is pressed in firmly. Put the plug on
the other end of the cable into your wall outlet or power supply socket.
Power
Power
Press this button to turn the CD Player on and off. When first connecting the unit,
make sure this button is in the off position.
To install a CD, press the Open/Close button. The CD tray will open and the display
will show, Open. Place a CD in the tray, label facing up. Press the Open/Close
button again. The CD tray will close and the display will show, Close. In a few
seconds, the CD Player will read the disc and the display will show the total number
of tracks and total playing time. The disc is now ready to play.
Press to play the CD. Make sure your amplifier is set to the correct input. The
display window will show the track playing(number one) and the elapsed time of
the track being played.
To
Pause
(interrupt play) press the play button once while the disc is playing. The
display will show, Pause. To resume play from the same point, press the play
button again. Note: It is not good to leave CD players in pause mode for an
extended period of time as it decreases laser life.
Press Stop to stop the CD playing. The display window will show the total number
of tracks on the disc and the total playing time.
Skip(Double Arrow Left and Double Arrow Right Keys)
Skip(Double Arrow Left and Double Arrow Right Keys)
To start a CD with a track other than the first, or to advance forward or backward to
different tracks on the disc, press the double arrow button in the direction of the
track you wish to hear. Pressing the button multiple times will advance through
previous or following tracks. There is no need to hit the play button. Once the
desired track is located(shown in the display window), remove your finger. The
player will automatically begin playing your selected track.
6
6
5
5
AC IN
AC IN
230Vac 50/60Hz,500mAT
230Vac 50/60Hz,500mAT
115Vac 5 0/60Hz,1AT
115Vac 5 0/60Hz,1AT
FIXED
FIXED
R
R
L
L
ANALOG OUT
ANALOG OUT
DIGITAL OUT
DIGITAL OUT
COAXIAL
COAXIAL
MODEL: ONIX XCD - 99
SERIAL NO.:
MODEL: ONIX XCD - 99
SERIAL NO.:
WARNING
TO PREVENT FIRE OR SHOCK HAZARD
DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE
WARNING
TO PREVENT FIRE OR SHOCK HAZARD
DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE
USE ONLY WITH A 250V FUSE
EMPLOYER UNIQUEMNT AVEC
UN FUSIBLE DE 250V
USE ONLY WITH A 250V FUSE
EMPLOYER UNIQUEMNT AVEC
UN FUSIBLE DE 250V
110-120
110-120
22
0-2
40
22
0-2
40
CLASS 1 LASER PRODUCT
APPAREIL LASER DE CLASSE 1
PRODUCTO LASER CLASE 1
CLASS 1 LASER PRODUCT
APPAREIL LASER DE CLASSE 1
PRODUCTO LASER CLASE 1
ONIX Audio,LLC
ONIX Audio,LLC
368 S.McCaslin Blvd # 189,
Louisville,CO 80027 USA
368 S.McCaslin Blvd # 189,
Louisville,CO 80027 USA
MADE IN P RC
MADE IN P RC
230Vac 50/60Hz,500mAT
230Vac 50/60Hz,500mAT
115Vac 5 0/60Hz,1AT
115Vac 5 0/60Hz,1AT
USE ONLY WITH A 250V FUSE
EMPLOYER UNIQUEMNT AVEC
UN FUSIBLE DE 250V
USE ONLY WITH A 250V FUSE
EMPLOYER UNIQUEMNT AVEC
UN FUSIBLE DE 250V
110-120
110-120
22
0-2
40
22
0-2
40
POWER
POWER
PLAY
PLAY
STOP
STOP
OPEN / CLOSE
OPEN / CLOSE
PREV
PREV
NEXT
NEXT
X C D - 9 9
C O M P A C T D I S C P L A Y E R
X C D - 9 9
C O M P A C T D I S C P L A Y E R
