34
SPECIAL SETTINGS
EN
There are 2 ways to set “BD Audio Mode” setting;
whether to output the secondary and interactive audio
accompanied by the primary audio or only the primary
audio. Depending on the setting of the mode, Dolby
Digital, Dolby Digital Plus, Dolby TrueHD, DTS, or DTS-HD
output changes between multi LPCM and bitstream.
1
In stop mode with BD inserted, press [MODE].
2
Use [
K
/
L
] to select your desired setting.
“HD Audio Output”:
Only the primary audio will be output. Set this mode in
order to output Dolby Digital, Dolby Digital Plus, Dolby
TrueHD, DTS or DTS-HD audio of BD through HDMI
connection.
“Mix Audio Output”:
If it is available, BD-video’s secondary and interactive
audio will be output with the primary audio.
• The secondary audio is the audio for the secondary
video (Director’s comment etc.) and the interactive
audio is the audio for the interactive application
(Button click sounds etc.).
3
Press [RETURN] to exit.
• You can also set “BD Audio Mode” from the setup
You can adjust the picture quality and store the setting
you have adjusted on memory 1-5.
1
During playback, press [MODE] repeatedly
until the picture adjustment menu appears.
2
Use [
K
/
L
] to select a memory from
“Memory1” to “Memory5” to store your
setting, then press [ENTER].
3
Use [
K
/
L
] to select a item to be adjusted, then
use [
s
/
B
] or [ENTER] to adjust the setting.
* Default setting
Setting the BD Audio Mode
Note
• In “Mix Audio Output” mode, if there is no secondary
and interactive audio, the audio will be output as
“HD Audio Output” mode.
• In “Mix Audio Output” mode, even if you set “HDMI
Multi(Normal)” in “HDMI Audio Out” setting, multi
LPCM will be output from HDMI OUT jack for BD
audio. Refer to page 15.
• In “Mix Audio Output” mode with HDMI audio being
output, 2-channel down-mixed LPCM will be output
from AUDIO OUTPUT (DIGITAL OPTICAL/COAXIAL)
jack for BD audio.
• You can also set “BD Audio Mode” setting from the
setup menu. Refer to page 40.
Adjusting the Picture
BD-V
BD Audio Mode
HD Audio Output
BD-V
DVD-V
AVCHD
DivX
Memory1
Item
Description
Adjustment range
1. Contrast
Adjusts the
difference
between the bright
and dark parts of
the picture.
-7 to +7 (0*)
2. Brightness
Adjusts the
brightness of the
picture.
0 to +15 (0*)
3. Sharpness
Adjusts the
sharpness of the
picture for
frequency range.
-6 to +6 (0*)
4. Gamma
Correction
Detailed
adjustment of the
picture’s
brightness.
0 to +5 (0*)
5. Color
Adjusts the
balance between
green and red.
-7 to +7 (0*)
6. Noise
Reduction
(Not available
for BD/
AVCHD)
Reduces the noise
of the playback
picture.
Off*
1: Executes MPEG
noise reduction
which reduces
the block noise
and mosquito
noise on the
subtitle on movie.
2: Executes 3D noise
reduction which
detects and
deletes the noise
by comparing
each picture
frames.
3: Executes both
MPEG noise
reduction and 3D
noise reduction.
Note
• The setting remains even you turn the unit into the
standby mode except unplug the AC cord.
• For BD and AVCHD files, noise reduction is not
effective.
2.
1.
6.
0
+1
s
B
Off
Off
Contrast
Brightness
Noise Reduction
E5L50ED_EN.book Page 34 Wednesday, June 10, 2009 1:02 PM
