50
FUNCTION SETUP
EN
5
Press [RETURN] to go back to the previous screen, or
press [SETUP] to exit.
Deactivate all the network connection and settings.
1
Follow steps 1 to 4 in “Connection Test” on page 47.
2
Use [
K
/
L
] to select “Disable”, then press [ENTER].
3
Press [RETURN] to go back to the previous screen, or
press [SETUP] to exit.
You can confirm the current software version.
1
Follow steps 1 to 3 in “Connection Test” on page 47.
2
Use [
K
/
L
] to select “Software Upgrade”, then press
[ENTER].
3
Use [
K
/
L
] to select “Current Version”, then press
[ENTER].
4
Press [ENTER] or [RETURN] to exit.
You can upgrade the software by using disc.
1
Follow steps 1 to 3 in “Connection Test” on page 47.
2
Use [
K
/
L
] to select “Software Upgrade”, then press
[ENTER].
3
Use [
K
/
L
] to select “Disc Upgrade”, then press
[ENTER].
4
Use [
K
/
L
] to select “Yes”, then press [ENTER].
5
Disc tray will open automatically.
• Insert the disc for software upgrade and then press
[OPEN/CLOSE
A
]
.
6
After completing loading disc, confirmation
message will appear. Select “Yes” and press [ENTER]
to start upgrading.
• It may take a while to complete the upgrading.
(Please wait until “100%” appears on the front panel
display.)
7
After the disc upgrade finishes, this unit will restart
and eject the disc.
You can upgrade the software by connecting the unit to
the Internet.
1
Follow steps 1 to 3 in “Connection Test” on page 47.
2
Use [
K
/
L
] to select “Software Upgrade”, then press
[ENTER].
3
Use [
K
/
L
] to select “Network Upgrade”, then press
[ENTER].
4
Use [
K
/
L
] to select “Yes”, then press [ENTER].
• This unit will then start checking for the latest
firmware version.
5
Confirmation message will appear.
Use [
K
/
L
] to select “Yes”, then press [ENTER].
• The unit will start downloading the latest firmware
version.
6
When the download completes, confirmation
message will appear. Press [ENTER].
• The unit will start upgrading the firmware version.
• It may take a while to complete the upgrading.
(Please wait until “100%” appears on the front panel
display.)
7
After upgrading finishes, this unit will restart and
open the disc tray automatically.
Disable
Note
• The network connection can be reactivated by
setting the network connection to “Enable(Easy)” or
“Enable(Custom)”.
Software Upgrade
Current Version
Note
• Please visit www.onkyo.com to download the latest
firmware version.
Disc Upgrade
x.xxx
www.onkyo.com
Others
Current Version
Current Version
If you wish to check latest upgrade
or other product information,
please check our Website.
Note
• Please do not unplug the AC power cord while
executing the “Disc Upgrade”.
• All settings will remain the same even if you upgrade
the firmware version.
Network Upgrade
Note
• Please do not unplug the AC power cord or LAN cable
while executing the “Network Upgrade”.
• All settings will remain the same even if you upgrade
the software version.
• The disc tray will open automatically after upgrading
finishes. This is not a malfunction.
E5L50ED_EN.book Page 50 Wednesday, June 10, 2009 1:02 PM
