24
Additional Playback Functions
2
1
3
NEXT
SELECTION
DISC
1
DISC
2
DISC
3
DISC
4
DISC
5
Next Selection: Preparing the next Audio Track
During playback of an audio CD, you can already prepare the next track that will be played as soon as the current one is
finished. The difference with direct selection of a track or disc is that playback of the prepared track starts only after the current
track is finished (i.e. not right away).
CD
1
2
3
5
6
7
8
9
+10
0
4
During playback of an audio CD, press
the NEXT SELECTION button on the
DV-C501 or the remote controller to
activate this function.
NEXT indicator
flashes
The NEXT indicator flashes and the disc
number and track number disappear on
the display.
Use the DISC 1 – 5 buttons (or DISC +
and DISC –) to select the disc that con-
tains the next track you want to listen to.
The number of the selected disc and the
“AL” indicator flash on the display.
If you wish to play all tracks of the
selected disc, press the NEXT SELEC-
TION button again to confirm the opera-
tion. (If you do not press the NEXT
SELECTION button, the operation will be
confirmed when the number and the “AL”
indicator stop flashing.
AL: means that all tracks will be played back.
Skip to Step 3 to select the track number.
Select the track using the numeric buttons.
The number of the selected track lights up
on the display.
In that case, the display looks as follows:
Notes:
• This function is only available for audio CDs (when the CD indicator lights).
• You need to press one of these buttons within 8 seconds after
pressing NEXT SELECTION. Otherwise, the Next Selection function
will be cancelled. In that case, start again with step 1.
Tip:
• You can also use the DISC SKIP
/
button on the DV-C501 to
select the next disc.
■
Checking the next selection
Press the NEXT SELECTION button to
confirm your selection.
The disc number flashes and the track
number lights up continuously. After a
few moments, the disc and track
numbers of the currently playing track
reappear.
You can check the next selection by
pressing the NEXT SELECTION button.
As soon as the current track is finished, the
DVD Changer will play back the prepared
track (or disc if you selected “AL”).
Notes:
• The
/
buttons are disabled while the Next Selection
function is activated. Pressing the DISC SKIP
/
buttons or
DISC +/– buttons will cancel the Next Select function.
• You can only prepare one track with Next Selection. See “Program-
ming Memory Sequences” on page 22 for how to prepare a series of
tracks. Preparing yet another track before the previously entered
Next Selection command has been executed overrides your first
setting, so that only the second Next Selection is carried out.
• If you stop playback by pressing the STOP button, the Next
Selection function is cancelled.
■
Cancelling the Next Selection function
If you decide not to take advantage of the Next Selection
function after all, proceed as follows:
1. Press the NEXT SELECTION button.
The disc numbers flash on the display.
2. Press the CLEAR button.
3. Press the NEXT SELECTION button again.
The NEXT indicator goes dark and the function is can-
celled.
NEXT
SELECTION
1
1
2
3
5
6
7
8
9
+10
0
4
REMOTE CONTROLLER
RC -
417DV
NEXT
SELECTION
DISC
+
/—
Numeric buttons
DISC 1—5
