13
Front & Rear Panels
—Continued
A
OPTICAL DIGITAL AUDIO OUTPUT [20]
This optical digital audio output can be connected to
an optical digital audio input on a hi-fi amp, AV
receiver, or surround sound decoder (Dolby Digital,
DTS).
B
COAXIAL DIGITAL AUDIO OUTPUT [20]
This coaxial digital audio output can be connected
to a coaxial digital audio input on a hi-fi amp, AV
receiver, or surround sound decoder (Dolby Digital,
DTS).
C
S VIDEO OUTPUT [19]
This connector can be used to connect a TV or pro-
jector with an S-Video input.
D
VIDEO OUTPUT [17]
This RCA/phono connector can be used to connect
a TV or projector with a composite video input.
E
COMPONENT VIDEO OUTPUT [19]
These sockets output component video and can be
connected to an component video input on a TV or
projector.
F
ANALOG AUDIO OUTPUT [17]
These RCA/phono connectors can be connected to
analog audio inputs on your TV, hi-fi amp, or AV
receiver.
G
jack [21]
These
(Remote Interactive) connectors can be
connected to the
connectors on your other
Onkyo AV components for interactive control.
Connecting an
cable only does not make the
system operational. You must also connect the audio
cables as well.
H
AV CONNECTOR [19]
This SCART output can be connected to a TV or
projector with a SCART input by using the supplied
SCART cable. This SCART connector outputs 2-
channel stereo audio, composite video, S-Video,
and RGB video.
I
AC INLET [22]
The supplied power cord is connected here. The
other of the power cord should be connected to a
suitable wall outlet.
Rear Panel
1
3
7
6
5
8
9
2
4
AV CONNECTOR
MODEL NO.
DV-SP
402E
OPTICAL
COAXIAL
DIGITAL
AUDIO OUTPUT
VIDEO OUTPUT
S VIDEO
VIDEO
ANALOG
AUDIO
OUTPUT
L
R
COMPONENT
Y
P
B
P
R
REMOTE
CONTROL
AC INLET