72
En
Using an RIHD-compatible TV, Player, or Recorder
p
, which stands for Remote Interactive over HDMI, is the name of the system control function found on Onkyo
components. The AV receiver can be used with CEC (Consumer Electronics Control), which allows system control over
HDMI and is part of the HDMI standard. CEC provides interoperability between various components, however,
operation with components other than
p
-compatible components cannot be guaranteed.
The following components are
p
-compatible. (As
of January 2011)
■
TV
• Toshiba REGZA-LINK compatible TV
• Sharp TV
■
Players/Recorders
• Onkyo and Integra
p
-compatible players
• Toshiba REGZA-LINK compatible players and
recorders (only when used together with Toshiba
REGZA-LINK compatible TV)
• Sharp players and recorders (only when used together
with Sharp TV)
*
Models other than those mentioned above may have some
interoperability if compatible with CEC, which is part of the
HDMI Standard, but operation cannot be guaranteed.
Note
• For proper linked operations, do not connect more
p
-
compatible components than the quantities specified below, to
the HDMI input terminal.
– Blu-ray Disc/DVD players: up to three.
– Blu-ray Disc/DVD recorders/Digital Video Recorders: up to
three.
– Cable/Satellite Set-top boxes: up to four.
• Do not connect the AV receiver to another AV receiver/AV
amplifier via HDMI.
• Proper linked operations are not guaranteed when more
p
-compatible components than the above-mentioned
quantities are connected.
■
For
p
-compatible TV
The following linked operation is possible by connecting
the AV receiver to an
p
-compatible TV.
• The AV receiver will enter Standby mode when the
power of the TV is turned to Standby.
• You can set on the menu screen of the TV to either
output the audio from the speakers connected to the AV
receiver, or from the speakers of the TV.
• It is possible to output the video/audio coming from the
antenna or from the input jack of the TV from the
speakers connected to the AV receiver. (A connection
such as optical digital cable or similar is required in
addition to the HDMI cable.)
• Input to the AV receiver can be selected with the remote
controller of the TV.
• Operations such as volume adjustment or similar for the
AV receiver can be performed from the remote
controller of the TV.
■
For
p
-compatible players/recorders
The following linked operation is possible by connecting
the AV receiver to an
p
-compatible
player/recorder.
• When playback is started on the player/recorder, AV
receiver will switch to the HDMI input of the
player/recorder that is playing back.
• Operation of the player/recorder is possible via the
remote controller supplied with the AV receiver.
*
Not all functions may operate depending on the model.
About
p
-compatible components
Operations that can be performed with
p
connection
Summary of Contents for HT-R648
Page 75: ...75 En Memo...
