42
Using timer functions
Use the
/
button to select the
day of the week for activating the timer setting
and press the jog dial.
PLAY MODE
YES
In step 4 above:
When you select “HDD PLAY,” go to step 10, “Select a play list.”
When you select “D-1 REC,” “D-2 REC,” or “ANA REC,” go to
the step 11, “Select a target group for recording.”
MULTI JOG
PUSH TO ENTER
MULTI JOG
PUSH TO ENTER
MULTI JOG
PUSH TO ENTER
6. Set the start time and end time for the
timer setting.
• Turn the jog dial to select hour for the start
time. Press the jog dial to confirm the hour
and the highlight moves to the minute.
• After setting the start time for the timer
setting, the time one hour passed from the
start time appears as the end time.
• Use the
/
button move the
highlight forward or back.
• The maximum time from the start time to
the end time is 23 hours 59 minutes 59
seconds.
7. Confirm the start time and the end time.
Press the YES button to confirm the time. Then
the display changes to the indication of setting
the day of the week. At first, current day of the
week blinks.
MULTI JOG
PUSH TO ENTER
MULTI JOG
PUSH TO ENTER
MULTI JOG
PUSH TO ENTER
PLAY MODE
YES
8. Set the day of the week.
10. Select a play list.
(Only when you select “HDD PLAY” for timer function in step 4)
MULTI JOG
PUSH TO ENTER
9. Confirm the day of the week.
Press the YES button to confirm the day of the
week.
Turn the jog dial to select a play list and press it
to confirm the selection.
If you have not created any play list, “Current”
appears and the last group which was played
before the timer activated will be played when
the start time comes.
After pressing the jog dial, the timer setting
finishes and is enabled.
11. Select a target group for recording.
(Only when you select “D-1 REC,” “D-2 REC,” or “ANA REC.”)
Turn the jog dial to select a target group for
recording and press it to confirm the selection.
You can choose from “Current,” “New,” or
“Fix.”
Current:
Set a target group to the group the last
time the recording or playback was performed.
New:
Create a new target group.
Fix:
Select a target group from the existing
groups. Turn the jog dial to select a target group
for recording and press it to confirm the
selection.
Notes:
• When you record longer hours, the recording will be separated
automatically into a track every one hour.
• If an operation is performed such as playing, recording and
others when the start time for the timer setting comes, the timer
function may not operate normally.
• The timer function will activate whether the MB-S1 is turned on
or in the standby state.
• You can set up to 4 timer settings. However, when a timer
setting already executed has not completed yet and the start time
for another timer setting comes, the latter timer setting will be
ignored.
Summary of Contents for MB-S1
