background image

23

License and Trademark Information

Manufactured under license from Dolby Laboratories. Dolby, Dolby Atmos, 
Dolby Surround, Surround EX and the double-D symbol are trademarks of 
Dolby Laboratories.

For DTS patents, see http://patents.dts.com. Manufactured under license from 
DTS Licensing Limited. DTS, DTS-HD, the Symbol, & DTS and the Symbol 
together are registered trademarks, and DTS-HD Master Audio and DTS Neo:X 
| 11.1 are trademarks of DTS, Inc. © DTS, Inc. All Rights Reserved.

Qdeo and QuietVideo are trademarks of Marvell or its affiliates.

Re-Equalization and the “Re-EQ” logo are trademarks of THX Ltd.

Manufactured under license from THX Ltd. THX and the THX logo are 
registered in the U.S. and other jurisdictions.  All rights reserved. Surround EX 
is a trademark of Dolby Laboratories. Used with permission.
U.S. Pat. nos. 7,254,239 & 7,593,533 & 7,974,425 & 8,452,028 & 8,509,457 
Taiwan Pat. I238671 European Pat. 1,360,874

THX Ultra2 Plus

Before any home theater component can be THX Ultra2 Plus certified, it 
must pass a rigorous series of quality and performance tests. Only then can 
a product feature the THX Ultra2 Plus logo, which is your guarantee that 
the Home Theater products you purchase will give you superb performance 
for many years to come. THX Ultra2 Plus requirements define hundreds of 
parameters, including power amplifier performance, and integrated amplifier 
performance and operation for both digital and analog domains. THX Ultra2 
Plus receivers also feature proprietary THX technologies (e.g., THX Mode) 
which accurately translate movie soundtracks for home theater playback.

AccuEQ, Music Optimizer, RIHD and WRAT are trademarks of Onkyo 
Corporation.

“RIHD” and “RIHD (logo)” are trademarks of Onkyo Corporation.

®

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI 
Logo are trademarks or registered trademarks of HDMI Licensing LLC in the 
United States and other countries.

The Wi-Fi CERTIFIED

®

 Logo is a certification mark of the Wi-Fi Alliance.

Wi-Fi certified

®

 logo shows international association certifying interoperability 

“Wi-Fi alliance” ensures the product has passed the test for compatibility with 
other Wi-Fi certified equipment.

The Bluetooth

®

 word mark and logos are registered trademarks owned by 

Bluetooth SIG, Inc. and any use of such marks by Onkyo is under license. 
Other trademarks and trade names are those of their respective owners.
Onkyo does not guarantee Bluetooth compatibility between the AV controller 
and all Bluetooth-enabled devices.
For compatibility between the AV controller and another device with Bluetooth 
technology, consult the device’s documentation and dealer. In some countries, 
there may be restrictions on using Bluetooth devices. Check with your local 
authorities.

“MHL, the MHL Logo, and Mobile High-Definition Link are trademarks or 
registered trademarks of MHL LLC in the United States and other counties.”

InstaPrevue and the InstaPrevue logo are trademarks or registered trademarks 
of Silicon Image, Inc. in the United States and other countries.

Apple, iPod and iPhone are trademarks of Apple Inc., registered in the U.S. and 
other countries.

Apple TV is a trademark of Apple Inc., registered in the U.S. and other 
countries.

SIRIUS, XM and all related marks and logos are trademarks of Sirius XM Radio 
Inc. and its subsidiaries. All rights reserved.

DLNA

®

, the DLNA Logo and DLNA CERTIFIED

®

 are trademarks, service 

marks, or certification marks of the Digital Living Network Alliance.

This product is protected by certain intellectual property rights of Microsoft. Use 
or distribution of such technology outside of this product is prohibited without a 
license from Microsoft.

Windows and the Windows logo are trademarks of the Microsoft group of 
companies.

QR Code is a registered trademark of DENSO WAVE INCORPORATED.

Safari is a trademark or registered trademark of Apple Computer, Inc. in the 
United States.

“x.v.Color” is a trademark of Sony Corporation.

MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and 
Thomson.

“Xantech” is a registered trademark of Xantech Corporation.

“Niles” is a registered trademark of Niles Audio Corporation.

“All other trademarks are the property of their respective owners.”

DISCLAIMER

Through this device you are able to link to other services or websites which 
are not under the control of any company which has designed, manufactured 
or distributed/have distributed this device, and its affiliates (collectively, 
“Company”). We have no control over the nature, content and availability 
of those services. The inclusion of any links does not necessarily imply a 
recommendation or endorse the views expressed within them.
All information, content and services available through this device belong to 
third parties and are protected by copyright, patent, trademark and/or other 
intellectual property laws of applicable countries. 
The information, content and services provided through this device are for your 
personal, noncommercial use only. Any information, content or services may 
not be used in any manner other than previously approved by the appropriate 
content owner or service provider.
You may not modify, copy, republish, translate, exploit, create derivative works, 
upload, post, transmit, sell or distribute in any manner any information, content 
or services available through this device, unless expressly permitted by the 
appropriate copyright, patent, trademark and/or other intellectual property 
owner, including, without limitation, content owner or service provider.
THE CONTENT AND SERVICES AVAILABLE THROUGH THIS DEVICE ARE 
PROVIDED “AS IS”.
COMPANY DOES NOT WARRANT INFORMATION, CONTENT OR 
SERVICES SO PROVIDED, EITHER EXPRESSLY OR IMPLIEDLY, FOR ANY 
PURPOSE.
COMPANY EXPRESSLY DISCLAIMS ANY WARRANTIES, EXPRESS 
OR IMPLIED, INCLUDING BUT NOT LIMITED TO, WARRANTIES OF 
TITLE, NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A 
PARTICULAR PURPOSE.
Company makes no representation or warranty of any kind, express or implied, 
about the completeness, accuracy, validity, legality, reliability, suitability or 
availability with respect to the information, content or services available through 
this device. Company shall not be liable, whether in contract or tort, including 
negligence and strict liability, for any direct, indirect, special, incidental or 
consequential damages or any other damages arising out of, or in connection 
with, any information contained in, or as a result of the use of any content or 
service by you or any third party, even if Company has been advised of the 
possibility of such damages, nor shall Company be liable for any third party 
claims against users of this device or any third party.
In no event shall Company be responsible nor liable for, without limiting the 
generality of the foregoing, any interruption or suspension of any information, 
content or service available through this device. Company is neither responsible 
nor liable for customer service related to the information, content and services 
available through this device. Any question or request for service relating to 
the information, content or services should be made directly to the appropriate 
content owners and services providers.

Summary of Contents for PR-SC5530



























Reviews: