Onkyo T-4355, Instruction Manual

15

Listening to the Radio

—Continued

You can store up to 30 of your favorite radio stations as 
presets for quick selection. Stations can be preset auto-
matically using the Auto Preset function or manually.

Notes:

• You can preset up to 30 AM/FM stations. If you try to 

store more than this, the message “FULL” will appear 
on the display.

• Using the remote controller while listening to an AM 

radio station may cause interference.

With the Auto Preset function, you can search and store 
all of the radio stations available in your area in one go.

Notes:

• All existing presets will be replaced when the Auto 

Preset function is used.

• Be sure that your antennas are positioned so as to 

obtain the best possible reception (see page 12).

Note:

Depending on your location, a preset may be stored 
with no station and you’ll hear only noise when you 
select it. In this case, delete the preset (see page 18).

Here you can tune into stations individually and store 
them as presets. This allows you to store stations in any 
order you like.

Notes:

• You can store up to 30 stations, and this can be any 

combination of FM and AM stations. For example, 17 
FM stations and 13 AM stations, or 8 FM stations and 
22 AM stations.

• Although the numbering schemes for FM and AM 

presets both start at 1, it doesn’t matter because FM 
and AM presets are selected independently.

• Stations can be stored to presets in any order. For 

example, you could store some AM stations to presets 
2, 1, 9, and so on.

Presetting All Stations Automatically
(Auto Preset)

Press and hold the [MEMORY] 
button for about 5 seconds until 
auto tuning starts.

When the [MEMORY] button is 
pressed, first, the MEM indicator 
flashes. Next, “AUTO PRESET” 
flashes on the display, followed by the 
tuning frequency, and then auto tuning 
starts. When a station is found, auto 
tuning stops and the 

 indicator 

lights up.

Starting at the bottom of the frequency 
band, the T-4355 automatically tunes 
and stores up to 20 FM stations, then 
up to 10 AM stations.

MEMORY

Presetting Stations Manually

1

Use the [BAND] button to select 
FM or AM.

The band switches between FM and 
AM each time you press the button.

2

Press the TUNING [

]/[

] but-

tons for 1 second until auto tun-
ing starts.

The frequency display changes during 
auto tuning.

Auto tuning stops when a station is 
found.

TUNING

PRESET

MEMORY

BAND