background image

17

Listening to the Radio

—Continued

Radio presets can be named for easy identification, and 
names may contain up to 8 characters from the follow-
ing selection.

The underscore (_) character is actually a space.

Hints:

• To cancel the naming process without storing the 

name, press the [MEMORY] button.

• After the eighth character has been entered, pressing 

the [MEMORY] button will move the cursor back to 
the first character.

Correcting Characters

If Name Edit mode is not selected, follow steps 1 and 2 
in the left column.

Note:

Text editing features such as moving subsequent charac-
ters to the right when a new character is inserted, or 
moving subsequent characters to the left when a charac-
ter is deleted are not supported.

Deleting All Characters in One Go

If Name Edit mode is not selected, follow steps 1 and 2 
in the left column.

Naming Presets

1

Select the preset that you want to 
name.

See page 16 for selecting presets.

2

Press and hold down the [DIS-
PLAY] button for 3 seconds to 
select Name Edit mode.

The cursor appears on the display.

3

Use the PRESET [

]/[

] buttons 

to select the characters.

4

Press the [MEMORY] button to 
set the character.

The cursor moves to the next character.

5

Repeat steps 3 and 4 to enter the 
other characters. Press the [DIS-
PLAY] button when you’ve fin-
ished.

The radio frequency reappears on the 
display.

_ A B C D E F G H I J K L M N O P Q R S T U V W 
X Y Z 
a b c d e f g h i j k l m n o p q r s t u v w x y z 
" ' & ( ) [ ] * + , - . / = ? 0 1 2 3 4 5 6 7 8 9

DISPLAY

MEMORY

PRESET

1

Use the TUNING [

]/[

] buttons 

to select the character to edit.

2

Use the PRESET [

]/[

] buttons 

to change the character.

3

Press the [DISPLAY] button to 
store the name and exit Name 
Edit mode.

While holding down the [MEM-
ORY] button, press the [FM 
MODE] button.

Note:

Make sure that Name Edit mode is 
selected before doing this because if it 
isn’t, the current preset will be deleted 
instead.

DISPLAY

PRESET

TUNING

CLEAR

FM MODE

MEMORY

Summary of Contents for T-4355

























Reviews: