40
En
The Home menu provides you quick access to frequently
used menus without having to go through the long
standard menu. This menu enables you to change settings
and view the current information.
Note
*1
For the
PORT
input selector, the name of Universal Port
Option Dock will be displayed.
*2
Only when you have selected “
Custom
” in the “
Picture
Mode
” (
➔
page 53
), pressing
ENTER
allows you to adjust
the following items via the Home menu
:
“
Brightness
”,
“
Contrast
”, “
Hue
” and “
Saturation
”. Press
RETURN
to
return to the “
Picture Mode
” setting.
*3
Depending on the input source and listening mode, not all
channels shown here output the sound.
With the sleep timer, you can set the AV receiver to turn
off automatically after a specified period.
You can adjust the brightness of the AV receiver’s
display.
Using the Home Menu
The Home menus appear only on a TV that is
connected to the
HDMI OUT
. If your TV is connected
to the
MONITOR OUT V
or the
COMPONENT
VIDEO OUT
, use the AV receiver’s display when
changing settings.
1
Press
RECEIVER
followed by
HOME
.
The Home menu will be superimposed on the TV
screen.
2
Use
q
/
w
and
ENTER
to make the desired selection.
■
Input
*1
`
You can select the input source while viewing the
information as follows: the name of input
selectors, input assignments, radio information,
and ARC function setting.
Press
ENTER
to display the current input
source, followed by
q
/
w
to select the desired
input source. Pressing
ENTER
again switches
to the selected input source.
■
Audio
`
You can change the following settings: “
Bass
”,
“
Treble
”, “
Subwoofer Level
”, “
Center Level
”,
“
Audyssey
”, “
Dynamic EQ
”,
“
Dynamic Volume
”, “
Late Night
”, “
Music
Optimizer
”, “
Re-EQ
” and “
Re-EQ(THX)
”.
See also:
• “Audyssey” (
➔
page 50
)
• “Using the Audio Settings” (
➔
page 59
)
■
Video
`
You can change the following settings: “
Wide
Mode
” and “
Picture Mode
*2
”.
See also:
• “Picture Adjust” (
➔
page 53
)
■
Info
*3
`
You can view the information of the following
items: “
Audio
”, “
Video
” and “
Tuner
”.
■
Listening Mode
`
You can select the listening modes that are
grouped in the following categories:
MOVIE/TV
,
MUSIC
,
GAME
and
THX
.
Use
q
/
w
to select the category and
e
/
r
to
select the listening mode. Press
ENTER
to
switch to the selected listening mode.
Using the Sleep Timer
1
Press
RECEIVER
followed by
SLEEP
repeatedly
to select the required sleep time.
The sleep time can be set from 90 to 10 minutes in 10
minute steps.
The
SLEEP
indicator lights on the display when the
sleep timer has been set. The specified sleep time
appears on the display for about 5 seconds, then the
previous display reappears.
Tip
• If you need to cancel the sleep timer, press
SLEEP
repeatedly until the
SLEEP
indicator goes off.
• To check the time remaining until the AV receiver sleeps,
press
SLEEP
. Note that if you press again on
SLEEP
as
the time being displayed is equal or inferior to 10 minutes,
the sleep timer will go off.
Setting the Display Brightness
1
Press
RECEIVER
followed by
DIMMER
repeatedly to select:
•
MASTER VOLUME
indicator lights.
•
MASTER VOLUME
indicator goes off.
• Dim +
MASTER VOLUME
indicator goes off.
•
MASTER VOLUME
indicator goes off.
Tip
•
(North American and Taiwan models)
Alternatively,
you can use the AV receiver’s
DIMMER
.
