User guide Automatic Transfer Switch
•
Page 5
Page 4
•
User guide Automatic Transfer Switch
USER MANUAL
AUTOMATIC TRANSFER SWITCH
Model ATS-30A
1 Introduction
This ATS-30A product is designed with two independent power inlets to supply power to the load from a prima-
ry power source. Should primary power source fail, the secondary will automatically back up the connected
equipment without any interruption. The transfer time from one line to another is seamless to the connected
equipment. After switching to a secondary power source, the ATS can also switch power back to the primary
input when power to the primary input is restored.
Package contents:
• ATS module
• User manual*
• Mounting brackets
2 Product Overview
Front View
1. Power switch for input source A
2. Power switch for input source B
3. Circuit breaker for output 2
4. Circuit breaker for output 3
5. USB communication port
6. RS-232 communication port
7. Communication slot
8. Operation indicators (please refer to section 4 for the details)
Back View
1. Contact port (please refer to section 7 for the details)
2. Input source A connector
3. Input source B connector
4. Output connector “Output 1” (Grand)
5. Output receptacles “Output 2” (IEC 16A)
6. Output receptacles “Output 3” (IEC 10A)
