Online Technologies Limited
- 9 -
BHS-00A0 added to the list. (NOTE: Some Bluetooth phone can connect
automatically without pairing, and the headset can work just to select the
Bluetooth connection. Please refer to the User Manual about Bluetooth
connection of your cellular phone.)
Voice Dialing
When no call is in progress, press and hold the TALK button until you hear a tone
that indicates that you can say the desired name (“voice tag”). Say the voice tag.
The phone plays the voice tag and dials the related phone number.
You can also active voice dialing with your phone. For details on voice dialing, see
your phone’s user’s guide. Note that this functionality is only available if your
phone supports voice dialing.
Answer an incoming voice call
1. The Headset plays a RING tone whenever there is an incoming call.
2. Press the TALK button will answer the incoming call.
Hang up an ongoing voice call.
1. The Headset has an active call.
2. Press the TALK button will hang up the call.
Disconnect Connection via Headset.
1. The Headset has an RFCOMM connection with an cell phone.
2. Press and hold TALK button for 2 seconds will disconnect the connection.
Disconnect Connection via Cell Phone.
You can disconnect the headset from your phone when, for example, you want to
use another Bluetooth device with your phone.
Switch off the headset.
OR:
Disconnect the headset in the phone’s Bluetooth menu.
OR:
Move the headset more than 10 meters away from the phone.
The headset is also disconnected if its battery becomes flat.
Note that you do not need to delete the pairing with the headset to disconnect it.
When you reconnect a paired headset, you will not be asked for its passkey.
Adjust the Volume.
1. Make sure the Headset has an RFCOMM connection with a cell phone (in
HandsFree mode) OR there is an SCO connection with an AG (in Headset
mode).
2. Press the Volume UP/ Volume Down Button to adjust the volume.
3. To jump to the maximum volume, press and hold Volume Up button for 2
seconds.
4. To jump to the minimum volume, press and hold Volume Down button for 2
seconds.
