background image

For easy access to up to 10 of your favorite channels, follow the steps below.

1. Select a device from 

Device Categories

 that controls the channels. 

The        button’s red indicator light will blink once.

 

2. Press and hold the               button until the        button lights up red.

The       button’s red indicator light remains on.

3. Press the          button. The        button’s red indicator light blinks once 

and remains on.

4. Select the button (0 – 9) that you will use for storing your favorite 

channel. The        button’s red indicator light blinks once and remains on.

5. Enter the channel number you wish to program as a favorite channel. 

6. Press the          button, the        button’s red indicator light will turn off 

and the channel is saved.

NOTE:

 To change a stored favorite channel, repeat steps 1-6 above.

To Access Your Favorite Channels:

1. Press the          button. The       button’s red indicator lights up and 

remains lit.

2. To access the favorite channel, press the programmed button for that 

channel (0-9). The       button’s red indicator light blinks, then turns off 

as the command is sent. 

FAVORITE CHANNELS

PROGRAM

FAV

FAV

FAV

09

Summary of Contents for 100008755

















Reviews: