15
To program the macro, you first need to know
the device you use to access the service, and
then the sequence of keys you need to press
to always bring up the service you prefer,
For example, some Panasonic TVs will start
Netflix by pressing the Apps key, then Menu
Down Twice, and finally the OK key. Or on an
Apple TV, the sequence is Menu, Menu Down
and OK.
Once you have determined the sequence for
your device, follow these steps:
1. Sit in front of your device with it switched on (not on standby)
2.
Hold down the App Shortcut key until the LED blinks
twice.
3.
Press the device key for the device you want to use
for the macro (e.g. Stream)
4. Now perform the sequence of keys exactly as you would normally
to start your streaming service The remote will operate your device
and the macro is recorded in real time - so if it normally takes a few
seconds for your device to react don’t worry.
5.
Once you have finished the sequence - and the
Streaming Service has started on your device - hold
down the App Shortcut key until the LED blinks
twice and goes out. The macro is now stored.
Tips
• Make sure the ONN remote is operating the device in question
before programming
• If you find the Macro doesn’t work as expected, you can just repeat
the same sequence to reprogram
• When programming, wait for your device to respond first, the
remote will remember the timing
• The App Shortcut macro is tied to one device, remember to make
sure you are watching the correct device
APP SHORTCUT KEYS
ONN_6_Eng_Manual RDN1010321.indd 15
ONN_6_Eng_Manual RDN1010321.indd 15
26-02-2021 14:28
26-02-2021 14:28