Onn ONA13AV269, Product Manual

6

  Programming Your Remote

Your ONN universal remote control is designed to 

control up to 8 different audio/video devices such 

as TV, DVD, DVR, VCR, satellite, cable and audio 

using only one remote. To use this remote, you will 

need to program it to control the devices of your 

choice. There are two ways to program the remote 

- direct code entry or auto code search. 

Direct Code Entry (Recommended)

1.  Locate the Remote Code List 

provided in this manual. Find the

DEVICE CATEGORY

 you wish to 

program (for example 

TV, CBL, 

DVR, DVD, SAT, AUDIO, AUX1, 

AUX2

) and then find the 

BRAND

of that device. Circle all the codes 

under that brand. Example: For a GE 

TV, locate the TV code section then 

circle all of the GE TV codes.

2.  Manually turn on the device you 

wish to control. 

3.  Press and hold the 

SETUP 

button 

until the red indicator light stays on 

(approximately 2 seconds) and then 

release the 

SETUP

 button.

4.  Press and release the desired device 

button on the remote (

TV, CBL, 

DVR, DVD, SAT, AUDIO, AUX1, 

AUX2

). The red indicator will blink 

once and then remain on.  

5.  Enter the first 4-digit code previously 

found in the code list using the 

number buttons on the remote. If 

the code entered is a valid code, the 

red indicator light will turn off. If the 

code entered is not a valid code, 

the red indicator light will flash and 

remain on allowing you to re-enter 

the code. 

Note:

 If no buttons are pressed for 

35 seconds, the remote will exit the 

SETUP

TV

1

2

3

4

5

6

7

8

9