SATA 3.5” HDD Enclosure User Manual
4
Version 01 © 2006 All rights reserved.
System Requirements
PC
•
266MHz or faster CPU
•
64MB of RAM
•
Microsoft Windows, 2000, XP, 2003
•
One available eSATA, USB 2.0, FireWire or FireWire800 port (depending model)
Macintosh
•
Macintosh PowerPC or Intel Core Duo processor
•
Mac OS 9.X or newer (PowerPC processor)/Mac OS X.10.4 (Intel Core Duo
processor)
•
One available eSATA, USB 2.0, FireWire or FireWire800 port (depending upon
model)
Assembling the SATA 3.5” HDD Enclosure
To use the 3.5” SATA HDD Enclosure, install a 3.5” SATA HDD and assemble the
Enclosure housing by completing the steps provided in this manual.
Hard Drive Installation
1)
Using a Phillips screwdriver, remove 2 screws from the rear panel of the
Enclosure housing.
2)
Slide the drive tray out of the Enclosure housing.
3)
Insert the SATA HDD into the drive tray. Ensure that the SATA and power
connectors of the HDD are properly aligned with the corresponding SATA
and power connectors on the control board.
