5
Using the Glass Carafe Drip Coffee Maker
Before Use
• For the first time use, remove packing material and clean the main
unit / accessories.
• Clean the main unit / accessories when you have not used for a long
time.
How to Use
1. Lift to open the Coffee Maker lid. Fill carafe with cold tap water and
pour into water reservoir at the back of the unit. The stepped water
level indicator can be easily viewed inside unit.
IMPORTANT
: Before brewing, always check to make sure water level
is past the MIN line and add water if needed. Never exceed the MAX fill
line.
NOTE:
The amount of brewed coffee will always be less than the
amount of water placed into the water reservoir; as much as 10% is
absorbed by coffee grounds and filter.
2. Place empty carafe on the warming plate.
3. Place the permanent filter in the removable filter holder. Measure
2 level tablespoons of drip or regular grind coffee for each cup of
coffee desired. For stronger or milder coffee, adjust amount of coffee
to suit your taste.
4. Drop the filter holder down into the housing. Close the lid.
5. Plug Coffee Maker into a 120V AC electrical wall outlet.
6. Connect the appliance with the power source of 120V 60Hz, then
open the top lid and fill the water tank with maximum amount of
room-temperature water (20-25°C), and then close the top lid.
Connect the appliance with the power source of 120V 60Hz, then
open the top lid and fill the water tank with maximum amount of room-
temperature water (20-25°C), and then close the top lid.
After power on, press “BREW/CANCEL” key once, the indicator
illuminates in white, the relay functions, at that time, the heating element
starts to work, which indicates the appliance starts to brew coffee. The
Brew icon will appear on the LCD display.
Press “BREW/CANCEL” once, the relay disconnects, the white indicator
turns off, which means the appliance stops brewing coffee.
After boiling away the water in the water tank, the thermostat functions
and the appliance enters into the keep-warm mode, after keeping warm
for 2 hours, the indicator turns off, and the appliance enters into the
standby mode.
Connect the appliance with the power source of 120V 60Hz, the LCD
display shows 12:00 AM (“:” does not blink). The appliance enters into
the clock-
setting mode. Press “HR” and “MIN” keys to set the current
time. If there is not any operation within 15 seconds, the current time
shown in the LCD display will be confirmed and the appliance will enter
into the standby mode.
Set the clock
A.
Shortly press “HR” key once, one hour can be changed. Hold and
press “HR” key, the “hour” can be increased continuously.
B.
Shortly press “MIN” key once, one minute can be changed. Hold and
pr
ess “MIN” key, the “minute” can be increased continuously.
C.
After setting the time, press “BREW/CANCEL”, “Auto Brew” or “Bold”
to confirm the set current time, alternatively, do not operate the
appliance for 15 seconds and then the set current time is confirmed.
When the appliance is under the standby mode, hold and press “HR” or
“MIN” key for more than 3 seconds to enter into the clock setting mode.
Function selection:
A.
Regular coffee: Press the "Brew / Cancel" key once, the “Regular
coffee” is selected, and the white indicator turns on, the appliance
starts to brew coffee. After boiling away the water in the water tank,
the thermostat functions and the appliance enters into the keep-warm
mode and the white indicator off. After keeping warm for 2 hours, the
appliance turns off automatically. Press
“Bold” key under the “Regular
coffee” mode, the LCD display will show “Bold” and the “Bold coffee”
mode is selected.
B.
Bold coffee: Press “Bold” key , the LCD display shows “Bold” and
the “Bold coffee” mode is selected. Press the "Brew/Cancel" key
once, the white indicator turns on, the appliance starts to brew strong
coffee. After boiling away the water in the water tank, the thermostat
functions and the appliance enters into the keep-warm mode. The
bold function can only select in the standby mode or the Auto-Brew
mode.
C.Press and hold the "Brew/Cancel" button for 3 seconds to enter
"Clean" mode at any time. 80 cycles is not required to enter the clean
mode. Once clean mode is activated, the heater will turn on.
”Clean”
function: When the appliance has worked for 80 cycles cumulatively,
the LCD display shows "Cleaning" to remind the user that the
appliance needs to be cleaned. Hold and press the "BREW/CANCEL"
key for more than 3 seconds in any status, the white indicator turns
on, and the cleaning program is started, the heating elements works
until the water in the water tank is boiled away. Then the appliance
will enter into the standby mode. The “Cleaning” shown in the LCD
display can only be canceled after the de-scaling is finished.
D. Under the keep-
warm condition, press “BREW/CANCEL” key to
cancel the keep-warm function, at that time, the LCD display shows
the current time and the appliance enters into the standby mode.
”Auto Brew” function
A.
Press “Auto Brew” key, the LCD display shows “Auto Brew on” and
“AM 1:00”, then set the auto-brew time by following the operation
of setting the clock. After finish setting, press “ Auto Brew” key, the
display shows “Auto Brew on”, and the auto-brew time stops blinking,
then the appliance enters into the auto-brew mode, after 5 seconds,
the appliance goes back to the main interface, at that time, the LCD
display shows “Auto Brew on” and current time, which means the
auto-brew function is confirmed. The LCD display will turn off 1 minute
after the coffee maker enters the warming state.
B.
Press “Bold” key, the LCD display shows “Auto Brew on”, “Bold” and
the current time, which means the “Auto Brew” function for “Bold
coffee” mode is confirmed.
C.
When the auto-brew time is reached, the white indicator of
“BREW/
CANCEL” key lights up, and the coffee-brewing function is activated.
D.
Can press “Auto Brew” key to cancel the auto-brew function when
the appliance works under the auto-brew mode. After the auto-brew
function is confirmed, press “BREW/CANCEL” key, the appliance will
start to brew coffee and the current auto-brew function is canceled.
7. Press the START button. The Coffee Maker will begin the brew
cycle.
NOTE
: To interrupt the brewing process at any time, press the BREW
button; then remove plug from wall outlet.
8. Turn off the unit: press and hold START button, you can stop brewing
coffee, it will display keep warm time, which count from 0:00, after 1
min the display will off. The appliance will cut off power automatically
and enter sleep mode after two hours.
U
S
IN
G
T
H
E
D
R
IP
C
O
F
F
E
E
M
A
K
E
R
