6
USING
T
HE COFFEE
MA
KER
Using the Stainless Carafe Drip Coffee Maker
Before Use
• For the first time use, remove packing material and clean the
main unit / accessories.
• Clean the main unit / accessories when you have not used for
a long time.
How to Use
1.
Lift to open the Coffee Maker lid. Fill carafe with cold tap
water and pour into water reservoir at the back of the unit.
The stepped water level indicator can be easily viewed inside
unit.
IMPORTANT
: Before brewing, always check to make sure
water level is past the MIN line and add water if needed. Never
exceed the MAX fill line.
NOTE:
The amount of brewed coffee will always be less than
the amount of water placed into the water reservoir; as much as
10% is absorbed by coffee grounds and filter.
2.
Never place empty carafe on the warming plate.
3.
Place the permanent filter in the removable filter holder.
Measure 2 level tablespoons of drip or regular grind coffee
for each cup of coffee desired. For stronger or milder coffee,
adjust amount of coffee to suit your taste.
4.
Drop the filter holder down into the housing. Close the lid.
5.
Plug Coffee Maker into a 120V AC electrical wall outlet.
6.
Connect the appliance with the power source of 120V 60Hz,
then open the top lid and fill the water tank with maximum
amount of room-temperature water (20-25°C), and then close
the top lid.
Connect the appliance with the power source of 120V 60Hz,
then open the top lid and fill the water tank with maximum
amount of room-temperature water (20-25°C), and then close
the top lid.
After power on, press “BREW/CANCEL” key once, the indicator
illuminates in white, the relay functions, at that time, the
heating element starts to work, which indicates the appliance
starts to brew coffee. Press “BREW/CANCEL” once, the relay
disconnects, the white indicator turns off, which means the
appliance stops brewing coffee. After boiling away the water in
the water tank. The indicator turns off and the appliance enters
into the standby mode.
Connect the appliance with the power source of 120V 60Hz, the
LCD display shows 12:00 AM (“:” does not blink). The appliance
enters into the clock-
setting mode. Press “HR” and “MIN” keys
to set the current time. If there is not any operation within 15
seconds, the current time shown in the LCD display will be
confirmed and the appliance will enter into the standby mode.
Set the clock
A.
Shortly press “HR” key once, one hour can be changed.
Hold and press “HR” key, the “hour” can be increased
continuously.
B. Shor
tly press “MIN” key once, one minute can be changed.
Hold and press “MIN” key, the “minute” can be increased
continuously.
C.
After setting the time, press “BREW/CANCEL”, “Auto Brew”
or “Bold” to confirm the set current time, alternatively, do
not operate the appliance for 15 seconds and then the set
current time is confirmed.
When the appliance is under the standby mode, hold and press
“HR” or “MIN” key for more than 3 seconds to enter into the
clock setting mode.
Function selection:
A. Regular coffee: Press the "Brew / Cancel" key once, the
“Regular coffee” is selected, and the white indicator turns on,
the appliance starts to brew coffee. After boiling away the
water in the water tank, the white indicator off. Press “Bold”
key under the “Regular coffee” mode, the LCD display will
show “Bold” and the “Bold coffee” mode is selected.
B.
Bold coffee: Press “Bold” key , the LCD display shows “Bold”
and the “Bold coffee” mode is selected. Press the "Brew/
Cancel" key once, the white indicator turns on, the appliance
starts to brew strong coffee. The bold function can only select
in the standby mode or the Auto-Brew mode.
C.
”Clean” function: When the appliance has worked for 80
cycles cumulatively, the LCD display shows "Cleaning" to
remind the user that the appliance needs to be cleaned.
Hold and press the "BREW/CANCEL" key for more than 3
seconds in any status, the white indicator turns on, and the
cleaning program is started, the heating elements works until
the water in the water tank is boiled away, then the appliance
will enter into the standby mode. The “Cleaning” shown in
the LCD display can only be canceled after the descaling is
finished.
”Auto Brew” function
A.
Press “Auto Brew” key, the LCD display shows “Auto Brew
on” and “AM 1:00”, then set the auto-brew time by following
the operation of setting the clock. After finish setting, press “
Auto Brew” key, the display shows “Auto Brew on”, and the
auto-brew time stops blinking, then the appliance enters into
the auto-brew mode, after 5 seconds, the appliance goes
back to the main interface, at that time, the LCD display
shows “Auto Brew on” and current time, which means the
auto-brew function is confirmed.
B.
Press “Bold” key, the LCD display shows “Auto Brew on”,
“Bold” and the current time, which means the “Auto Brew”
function for “Bold coffee” mode is confirmed.
C. When the auto-brew time is reached, the white indicator
of “BREW/CANCEL” key lights up, and the coffee-brewing
function is activated.
D.
Can press “Auto Brew” key to cancel the auto-brew function
when the appliance works under the auto-brew mode. After
the auto-
brew function is confirmed, press “BREW/CANCEL”
key, the appliance will start to brew coffee and the current
auto-brew function is canceled.
7.
Press the START button. The Coffee Maker will begin the
brew cycle.
NOTE:
To interrupt the brewing process at any time, press the
BREW button; then remove plug from wall outlet.
8.
Turn off the unit: press and hold START button, you can stop
brewing coffee.
