3
From the Device menu in HOBOware, select Launch and configure the launch settings. Make sure both
the Abs. Pressure and
Temperature sensors are selected (temperature is required for temperature compensation of pressure) and click the Start button in
the lower right corner to send the launch settings to the logger. Note that the Start button text changes based on your Start Logging
selection.
4
Deploy the logger, making sure the end cap is in place. Take water level reference readings at the beginning and end of each
deployment.
5
Use the HOBO Waterproof Shuttle or base station to read out the logger.
6
Relaunch and redeploy logger as needed.
7
Plot data from logger. Print the plot, export data, save it as a project file, and more.
For detailed specifications and information about this logger, refer to the complete product manual. Go to
http://www.onsetcomp.com/support/manuals/u20l_17153 or scan the code below.
1-800-LOGGERS (564-4377) • 508-759-9500
www.onsetcomp.com • loggerhelp@onsetcomp.com
© 2014 Onset Computer Corporation. All rights reserved. Onset, HOBO, and HOBOware are
trademarks or registered trademarks of Onset Computer Corporation. All other trademarks are the
property of their respective companies.
17150-B MAN-QSG-U20L
3
From the Device menu in HOBOware, select Launch and configure the launch settings. Make sure both
the Abs. Pressure and
Temperature sensors are selected (temperature is required for temperature compensation of pressure) and click the Start button in
the lower right corner to send the launch settings to the logger. Note that the Start button text changes based on your Start Logging
selection.
4
Deploy the logger, making sure the end cap is in place. Take water level reference readings at the beginning and end of each
deployment.
5
Use the HOBO Waterproof Shuttle or base station to read out the logger.
6
Relaunch and redeploy logger as needed.
7
Plot data from logger. Print the plot, export data, save it as a project file, and more.
For detailed specifications and information about this logger, refer to the complete product manual. Go to
http://www.onsetcomp.com/support/manuals/u20l_17153 or scan the code below.
1-800-LOGGERS (564-4377) • 508-759-9500
www.onsetcomp.com • loggerhelp@onsetcomp.com
© 2014 Onset Computer Corporation. All rights reserved. Onset, HOBO, and HOBOware are
trademarks or registered trademarks of Onset Computer Corporation. All other trademarks are the
property of their respective companies.
17150-B MAN-QSG-U20L
