HOBO U30 Station (NRC) User’s Guide
15
Connecting the U30 to a Computer
To connect to a computer running HOBOware Pro, plug the “mini-B” end of
the USB cable provided into the USB port on the HOBO U30 Station and
connect the “A” end to the USB port in your computer.
If the device has never been connected to this computer before, it may take
some time for the computer to detect the new hardware and report that it has
connected successfully.
One or more messages will appear, indicating that new hardware has been
found. You may also hear a chime.
NOTE:
Your computer may tell you to reboot before you can use the device.
It is not necessary to reboot.
16
HOBO U30 Station (NRC) User’s Guide
Connecting the U30 to HOBOware Pro
To connect the U30 to HOBOware Pro:
1.
Launch HOBOware Pro.
2.
From the
Device
menu select
Select Device ….