HOBO U30 Station (NRC) User’s Guide
29
13.
Configure Launch Settings.
14.
Disconnect the computer from the U30 (make sure you remove the
USB cable from the U30).
15.
Close the door and snap the hinges shut on the HOBO U30 Station
case. Consider using padlocks to secure the case.
The system should begin operating as configured.
30
HOBO U30 Station (NRC) User’s Guide
Installing Grounding Wire
You should install the grounding wire if you are using the Wind Speed and
Direction Smart Sensor (S-WCA-MXXX) or if you are installing the HOBO
U30 Station on a roof or in a location with exposure to lightning.
The grounding wire may also be helpful in reducing sensor errors when
installing the HOBO U30 Station near other radio or electrical equipment or
antennas.
Insert the grounding wire through the opening and plug it into the ground
connector.
Connect Grounding Wire
