HOBO U30 Station (NRC) User’s Guide
35
Connect Solar Panel or AC Power
Connect a Solar Panel or AC Power, as shown below.
IMPORTANT
: Make sure you run the cable through the Primary Cable Slot
before you install the weatherproof cable channel.
Important
: If at any point you need to unplug the battery, unplug the solar
panel or AC adapter first. Damage may occur to the HOBO U30 Station if
the battery is unplugged before disconnecting the solar panel or AC adapter.
Connecting Solar Panel or AC Power
36
HOBO U30 Station (NRC) User’s Guide
Launching the U30 NRC in the Field
When you launch the U30 NRC in the field, change your
Logging Interval
and
Launch Options
to the actual values you want to use in deployment.
1.
Connect your notebook computer to the U30 (see Connecting the
U30 to on page 15).
2.
Connect the U30 to HOBOware Pro (see page 16).
3.
Click the
Launch
icon on the toolbar to display the
Launch
window
(or from the Main Menu go to
Device
>
Launch
).
The Launch Logger window appears.
4.
Configure
Logging Interval
and
Launch Options
as desired. See
the HOBOware Users Manual for details.
5.
Click
Launch
.