10
2.2 Device Installation/Uninstallation
Installation
1. To attach the bracket to the device, slide the bracket
into the bracket slot until a click sound appears.
2. To attach the device on the windshield, put the
suction cup onto the windshield and press down the
clamp.
3.
Make sure the bracket has been firmly installed. To
adjust the vertical angle, loosen the top knob; to
swivel the device horizontally, unscrew the bottom
knob screw. Screw back tightly to secure recording angle.
Uninstallation
1.
Device Uninstallation
：
To disconnect the suction cup and the windshield, pull down the
clamp. Make sure the device is securely in your hand in advance.
2.
To disconnect the bracket and the device, press on the part on the bracket base that
sticks out and push outward while pulling the device inward.
2.3 Wiring Suggestion
1. Take the cigarette charger cable upward and
set it along the inside seam of car towards the
door of the shotgun seat.
2. Extend the cable to the door-frame strip
(front pillar inner side), downward to fix under
the mat and into the console.
3. Tuck the extra cable under the mat if applicable.
※
Coins or other solid objects could be helpful in fixing the cable to its position.
AutoCam GPS FHD v2
