Onyx RX32, Operator'S Manual

9

MACHINE UNPACKING

MACHINE INSTALLATION INSTRUCTIONS

Note: Gently place each battery into the battery cabin to 

avoid damage to the battery and the machine.

1. Please carefully check whether there is damage on the packing box of the machine. If there is, please imme-

diately contact the shipping carrier.

2. Unpack on a level and flat surface.

WARNING: Fire or explosion hazard: The battery releases hydrogen. Please be away from 

spark or open flame. The battery cover must be kept open when charging.

FOR SAFETY:  

 Please wear protective gloves and eye protectors when treating the battery and battery 

wiring when repairing and servicing the machine. Avoid contacting the battery acid.

Battery Installation

Battery Specification:

Four 6V 220Ah AGM Maintenance Free Batteries con-

nected in series to produce total battery power pack of 

24 volt, 220 Ah AGM Maintenance Free Batteries.

1. Stop and place the machine on the level ground and 

take out the key. Lift up the recovery tank to expose the 

battery cabin.

2. Carefully install the four 6V batteries in the battery 

cabin and connect the battery cable according to the 

following figure:

3. Before connecting the battery, please first ensure whether the electrodes and 

electric terminals are clean. Use electrode cleaning fluid and wire brush as required.

4. After the battery is installed, please check the scale of the battery power meter. 

Charge the battery as required.

Hint: Paint a thin layer of metal-free lubricating oil or 

protective spray on the connected wiring to avoid battery 

corrosion.