CHARGING
POWER
BUTTON
To turn on, press the power
button 5 times fast.
Remember to register your
product. Instructions
found above.
To turn on, press the power
button 5 times fast.
FULLY
CHARGED
Enter the 6 digit authentication code
printed on your battery, at
oozelife.com/apps/product-registration
to register your product.
USB SMART CHARGER
INDICATION LIGHT
WARRANTY
INFORMATION
BATTERY LIGHT
To start press power button twice.
To end press power button once.
PREHEAT MODE
AUTHENTICATION
CODE
Twist the battery dial at
the bottom.
Turn right to increase voltage.
Turn left to decrease voltage.
FLEX TEMP
(2.0-4.0V)
Note: Light will flash 15 times
when the battery needs to
be charged. If there is
connection issues, light will
flash 4 times.
Stops heating after 10 seconds
to preserve terpenes.
SAFE SESH
CYCLE
When in use or charging
When OFF or not in use
Blinking Red = Charge
