5
5)
According to the request of use angle, Heating Element
Assembly can adjust Angle at 0
º
~45
º
. Having selected
the angle, tighten the screws (Fig.5)
6. OPERATION
The appliance is switched on by means of the pull switch (5). The slight vibration noticeable when the appliance is switched on
will stop after a few seconds.
7. OUTPUT
- Position 0: Stop
- Position 1: 650W (normal power)
- Position 2: 1300W (intermediate power)
- Position 3: 2000W (full power)
8. MAINTENANCE
Your appliance dose not requires any particular maintenance. However, in the event of a malfunction, please consult an
Approved Service Center.
This product bears the selective sorting symbol for waste electrical and electronic equipment (WEEE).
This means that this product must be handled pursuant to European Directive 2002/96/EC in order to be recycled or
dismantled to minimize its impact on the environment.
For further information, please contact your local or regional authorities.
Electronic products not included in the selective sorting process are potentially dangerous for the environment and human
heath due to the presence of hazardous substances.
