SAFETECH ST80
SAFETECH ST80
O p a l e - P a r a c h u t e s . c o m
Opale Aero System SARL - 23 rue de la Motte
62250 MARQUISE - France
contact@opale-aerosystem.com +33(0)981 144 387
© Copyright 2016 - Opale Aerosystem SARL - Tous droits réservés
O p a l e - P a r a c h u t e s . c o m
Opale Aero System SARL - 23 rue de la Motte
62250 MARQUISE - France
contact@opale-aerosystem.com +33(0)981 144 387
© Copyright 2016 - Opale Aerosystem SARL - Tous droits réservés
Parachute preparation and installation
Transmitter / module setting
Slide the 8 on top of the parachute.
Cover the tube with the neopren cap.
Tighten it firmly.
Note: Make sure that the fixation line is correctly
placed between the tube and the cap.
Never place the fixation line through the cap.
In locking status the piston is locked with the pin. The
servomotor horn can have an angle from 45 to 70°
(the angle formed by the servomotor plan and the
horn).
In ejection status, the angle formed has to be -45°.
The pin fully release the arming rod.
12
13
