SAFETECH ST60
O p a l e - P a r a c h u t e s . c o m
Opale Aero System SARL - 23 rue de la Motte
62250 MARQUISE - France
contact@opale-aerosystem.com +33(0)981 144 387
© Copyright 2016 - Opale Aerosystem SARL - Tous droits réservés
Assembling
Do the same operation symetrically in relation to the
first piece of adhesive foam.
Parachute preparation and installation
Remove the parachute from its pocket and unfold it
totally.
A parachute properly stocked and aerated, without
being permanantly held in a constant pressure allows
a faster and a more efficient deployment.
Make sure that the lines are not entangled.
Hold the lines with something heavy like a ballast or
anything at your disposal.
Arrange on both sides of the lines the parachute
panels.
Then place all the panels on one side.
Afterwards toggle them one by one on the other
side. This operation allows to properly place the fab-
rics for an optimal opening.
9
