background image

HY

BRID 3.0

HY

BRID 3.0

O p a l e - P a r a m o d e l s . c o m

Opale Aero System SARL - 23 rue de la Motte

62250 MARQUISE - France

contact@opale-paramodels.com +33(0)981 144 387

O p a l e - P a r a m o d e l s . c o m

Opale Aero System SARL - 23 rue de la Motte

62250 MARQUISE - France

contact@opale-paramodels.com +33(0)981 144 387

Thanks for having chosen an Opale-Parmodels product. We truly believe this wing is going to give you hours of 

enjoyment and will enable you to go through new outstanding piloting experiences.

This user’s guide content includes all the information you need to get your wing in flight and to ensure you will 

take good care of it. A good knowledge of your equipment will allow you to safely obtain most of its perfor-

mances for your greatest pleasure! Thanks for giving this manual to the new owner in case you decided to sell 

your radio-controlled paraglider.

Best regards,
The Opale-Paramodels Team

Safety Information

You should be properly insured according to the country regulation you are using our equipment in. 
You hereby accept the inherent risk of flying radio-controlled models.
Using our equipment in a bad way may increase risks. Neither Opale-Paramodels nor any other seller 
will be liable for any damage caused by any accident whatever the circumstances are. The way our 
equipment is used is incumbent upon the final user, including towards the law.

Contents

Wing 

composition 

 

 

        3 

Specifications 

         3

Radio 

Setup 

         4

Brakes 

Setup 

         5

Folding 

of 

the 

wing 

        6

Repair 

          7 

Bridle 

Layout 

         9 

FAQ 

Questions/Answers 

        10

Wing composition

Specifications

Flat wingspan: 400cm

Ratio: 5.3

Flat surface: 3,0m2

Bridle: Spliced Aramid 25 / 50daN / DFL 70

Tissue: Nylon Ultra light 20D 32gr

Cells: 32

Space between risers: 17 to 23cm

Total weight (incl RTF Backpack)

3kg

4kg

5kg

6kg

10kg

Wind speed

5km/h

10km/h

15km/h

25km/h

35km/h

Warranty

The wing is guaranteed against any manufacturing defect.

If, while using, the pilot cut or damage a bridle, tear any part of the wing,repair and replacement of dam-

aged parts are not taken in account by the warranty and the user will be charged for it.

Upperskin

Bridles

Risers

Ribs

Summary of Contents for HYBRID 3.0







Reviews: