Rescue System ©Copyright by Opale-‐Paramodels 2012
Page
4
sur
9
3. Parachute assembling
We are now going to welcome the parachute onboard using the Drop Pod we have previously clipped on the chassis.
To optimize your first opening, it is necessary to remove the lines closing the container. Make sure 3 or 4 lines are
going through the elastic loop as shown on the picture below.
Then position the parachute and its container onto the Drop Pod such as shown below:
Now get the strap and make it go through the front part of the Trike. Then, tighten it all pulling on the strap.
